Sentryline Terminal End III – Non release terminal

The Sentryline Terminal End III has been tested to the guidelines in NCHRP 350 for a gating Test Level 3 terminal end.

Request Information
STENDIIINonReleaseTerminal1
STENDIIINonReleaseTerminal2
STENDIIINonReleaseTerminal Connections
STENDIIINonReleaseTerminal Roadways
STENDIIINonReleaseTerminal1
STENDIIINonReleaseTerminal2
STENDIIINonReleaseTerminal Connections
STENDIIINonReleaseTerminal Roadways

Description


This new terminal is a non-releasing anchor design, designed for use with the Sentryline II NCHRP350 Wire Rope Safety Barrier System.

The Sentryline Terminal End III – Non release terminal comes with many components pre-assembled with quicker installation time over competitors.

When installed correctly, the system will allow an errant vehicle to over-ride or gate through the high tensioned anchor area of the terminal end.

Watch the Installation video

Features

  • Tested to NCHRP350 TL-3 (100kph) compliant 
  • AS/NZS 3845: 2015 compliant 
  • Low cost WRSB terminal anchor with minimal components
  • Point of need only 8m from ground anchor 
  • Exceptionally good vehicle behaviour 
  • Easily installed and low maintenance costs
  • Easily repaired after impact
  • Non releasing design after impact
  • Permitted for use in verge, median and gore areas

Specifications

  • Length of need is from Post 5 (measured 8m from ground anchor)
  • Maximum flare rate: 30:1 over the entire length of the terminal end (offset from tangent)
  • Posts 1 – 7 are spaced at 1.5m (straight)
  • All steel components are hot dip galvanised
  • Posts: Hot dip galvanised & powder coated 
  • Cable: 19mm 3 x 7 strand pre stretched 
  • In ground concrete foundation: 2500L x 1000W x 1500D mm 
  • 7 x line post footings 300mm diameter x 750D mm 
  • 4 x safety check link ropes
  • Concrete: 25Mpa
  • Tensioned to 25kN at 20°C. (Tension may vary depending on air temperature at the time if installation, see chart in the installation guidelines*)

Brochures

Manuals & Guides

Standards and Approvals

  • Sentryline II Wire Rope Barrier Systems have been designed and tested to meet the evaluation criteria of NCHRP 350 Test Levels 3 and 4
  • AS/NZS 3845:2015 compliant.
    Approved for use by Australian State Road Authorities.

Installation Guide

Merger of Australian Construction Products and Safe Direction

We are delighted to announce the merger of Safe Direction Pty Ltd and Australian Construction Products Pty Ltd (ACP).
On 1 May 2023 Jaybro, Australia’s leading supplier to the civil construction and infrastructure sector, and owner of ACP, purchased 100% of the share capital of Safe Direction. Under Jaybro’s ownership the two businesses will be merged to form Australia’s preeminent company manufacturing and supplying vehicle barrier systems.

A compelling motivation for the merger is the value created for our customers from combining the collective resources and knowledge of the two companies. Notably there will be significant broadening of the product range and enhancement to distribution reach and capacity. There will be transitionary steps as the two businesses assemble under the one entity, Safe Direction. Part of this transition includes the consolidation of the products and services offered by the merged business into a single web domain www.safedirection.com.au

We trust that this merger will provide increased value to you and we look forward to the opportunity to be of assistance.